 |
|
|||||||||||||||
|
||||||
|
|
|||||||||||||||
|
||||||
|
||||||||
Series of common burner |
|
||||
|
Lime kiln special burner nozzle |
|||||
 |
Range of application: being applied to all kinds of fuel gas lime kiln. Capability characteristics: adopting double in-band technology, fully mixing of gas and air, high flame rigidity, high combustion efficiency. This can realize cleaning on-line and prevent the blocking of burner nozzle. Technological parameter: 1. Use of fuel coke gas （Qdy=16700KJ/Nm3）；producer gas （Qdy=5400KJ/Nm3）； mixed gas （Qdy=8300KJ/Nm3） blast furnace gas （Qdy=3300KJ/Nm3） convertor gas （Qdy=6300KJ/Nm3） |
||||
| Sinter machine ignition burner nozzle |
|||||
 |
Range of application: being applied to all kinds of fuel gas lime kiln Capability characteristics：Adopting double in-band technology, fully mixing of gas and air, high flame rigidity, high combustion efficiency. This can realize cleaning on-line and prevent the blocking of burner nozzle. Technological parameter : 1. Use of fuel coke gas （Qdy=16700KJ/Nm3）； producer gas （Qdy=5400KJ/Nm3）； mixed gas （Qdy=8300KJ/Nm3） blast furnace gas （Qdy=3300KJ/Nm3） convertor gas （Qdy=6300KJ/Nm3） 2. Fuel pressure：>=1500Pa；3. Wind pressure in front of nozzle：>=2000Pa Capability characteristics：Adopting double in-band technology, fully mixing of gas and air, high flame rigidity, high combustion efficiency. This can realize cleaning on-line and prevent the blocking of burner nozzle. Technological parameter : 1. Use of fuel coke gas （Qdy=16700KJ/Nm3）； producer gas （Qdy=5400KJ/Nm3）； mixed gas （Qdy=8300KJ/Nm3） blast furnace gas （Qdy=3300KJ/Nm3） convertor gas （Qdy=6300KJ/Nm3） 2. Fuel pressure：>=1500Pa；3. Wind pressure in front of nozzle：>=2000Pa |
||||
Series of metallurgy combustion apparatus |
|||||
Other series |
|||||
| Hot stove burner high temperature nozzle | |||||
 |
Range of application: being applied to the site where the temperature is over 800℃, such as blast furnace hot blast stove and so on. Capability characteristics: 1.Adopting double in-band technology, fully mixing of gas and air, high flame rigidity, high combustion efficiency. This can realize cleaning on-line and prevent the blocking of burner nozzle. 2. This burner nozzle could adopt autoignition, and doesn't need combustion valve. It could be operated in a long distance. It is very easy to change over stove. Every hot blast stove can be outfitted 4-20 burner nozzles, and you could adjust the size and quantity of the burner nozzles according to the volume of hot blast stove. Technological parameter: 1. Use of fuel: blast furnace gas （Qdy=3100-3500KJ/Nm3）; 2. mode of operation: continuous; 3. designed gas pressure: 1500pa; 4. designed wind supply pressure: 2000pa; 5. direction of installation: any; 6. burning capacity of the single burner nozzle: 1500-7500Nm3/h |
||||
|
|||||
| Pellet shaft furnace burner nozzle | |||||
 |
Range of application：Being applied to pellet shaft furnace and pellet drying oven. Capability characteristics: 1. The construction of this burner nozzle contains traditional circumferential weld type and new many-headed in-band type. It adopts stainless steel construction and has many traits, such as lightweight, compact conformation, stable and complete combustion, long service life and so on. It is the preferred production of reconstruction of old furnace and construction of new furnace; 2. Pellet shaft furnace burner nozzle applies mature advanced technology and considers fully the users' automatic upgrading. It also designs autoignition pre-moded hole. Users could add autoignition system and flame eye, and don't need to replace the burner nozzle. After installing ignition oil gun, igniter, and oil supply system, the function pf autoignition will be achieved. This will improve greatly the operation and management level of pellet shaft furnace. Technological parameter：1. Use of fuel coke gas （Qdy=16700KJ/Nm3）； producer gas （Qdy=5400KJ/Nm3）； mixed gas （Qdy=8300KJ/Nm3） blast furnace gas （Qdy=3300KJ/Nm3） convertor gas （Qdy=6300KJ/Nm3） 2. Fuel pressure：>=1500Pa |
||||
| Hot blast stove gas burner nozzle (ceramic) | |||||
 |
Range of application: being applied to middle short, middle long flame industrial kiln, such as pellet shaft furnace, roll steel heating furnace, heat treatment furnace, thawing furnace, drying kiln, tunnel kiln and so on. Capability characteristics: low-pressure eddy current gas burner nozzle is eddy current low pressure gas burner nozzle of positive pressure blast and partly preheating. This nozzle could autogenerate rotation flow, thereby it could change the mixing condition of air and gas and shorten the length of flame. The construction is simple and particular, and the installation and maintenance are very convenient. Technological parameter: 1. Use of fuel coke gas （Qdy=16700KJ/Nm3）；producer gas （Qdy=5400KJ/Nm3）； mixed gas （Qdy=8300KJ/Nm3） blast furnace gas （Qdy=3300KJ/Nm3） convertor gas （Qdy=6300KJ/Nm3）2. Fuel pressure: >=3000Pa; 3. Wind pressure in front of nozzle 2000-3500Pa Rated burning capacity: (design conditions: cold gas pressure in front of nozzle 800Pa, freezing air pressure 2000Pa) |
||||
| Low pressure eddy current gas burner nozzle | |||||
 |
Range of application: being applied to middle short, middle long flame industrial kiln, such as pellet shaft furnace, roll steel heating furnace, heat treatment furnace, thawing furnace, drying kiln, tunnel kiln and so on. Capability characteristics: low-pressure eddy current gas burner nozzle is eddy current low pressure gas burner nozzle of positive pressure blast and partly preheating. This nozzle could autogenerate rotation flow, thereby it could change the mixing condition of air and gas and shorten the length of flame. The construction is simple and particular, and the installation and maintenance are very convenient. Technological parameter: 1. Use of fuel coke gas （Qdy=16700KJ/Nm3）；producer gas （Qdy=5400KJ/Nm3）； mixed gas （Qdy=8300KJ/Nm3） blast furnace gas （Qdy=3300KJ/Nm3） convertor gas （Qdy=6300KJ/Nm3）2. Fuel pressure: >=3000Pa; 3. Wind pressure in front of nozzle 2000-3500Pa Rated burning capacity: (design conditions: cold gas pressure in front of nozzle 800Pa, freezing air pressure 2000Pa) |
||||
 |
|||||
Tel：(086)0315-3163411/7045277 13931572100 Fax：(086)0315-7045277 E-mail:china@jinsharsq.com Tangshan Jinsha Trade and Industry Ltd. all rights reserved Website Production and Maintenance: (086)13483750352 |
