Home>Produces>Preheating furnace
Products 
   
Series of  common  burner
 
Preheating furnace
 
点击看大图
     
   
    Range of application: To employ together with big, middle and small loop type, drape type, flat type and box type sinter machine ignition furnace.
     Structural composition: SRW(horizontal)、SRL(vertical)、2SW/L(horizontal and vertical combination)air, gas double preheater is composed of combustion chamber, groups of air heat exchangers, groups of gas heat exchangers and so on.
    Capability characteristics:
    1. Among many kinds of double preheaters, materials, the wall temperature of which is over 400℃, all adopt stainless steel or almize carbon steel. Under the condition of normal operation, the service life can prolong 3-5 years.
   2.Groups of gas heat exchangers have cleanout opening, which could clean periodically to prevent blocking and affecting the effect of heat transfer.
   3.Outside the breather pipe, there is sweep opening, which could sweep the soot of external pipe of heat transfer pipe periodically with compressed air. It is good for transforming heat.
   4. Gas heat exchanger inside vertical flue adopts special circle arc bellows and dilatation joint. This could absorb thermal expansion stress, and it is very safe and reliable.
Series of metallurgy combustion apparatus
 
 
 
Other series
Name Unit  Standard(m2)
18 24 36 52 60(64) 90 130 180
the volume of gas in gas chamber Nm3 700 950 1400 2000 2500 4000 5000 7000
the volume of air in gas chamber Nm3 600 800 1200 1700 2100/2200 3500 4200 6000
the amount of gas chambers 1 1 1 1 1/2 2 2 2
temperature of combustion chamber 950-1100
exhaust fume temperature 300-350
quantity of gas chamber burner nozzles 2 2 2 2 2/5 5 5 5
Gas pressure in front of the nozzle KPa 1.0-1.5
wind pressure in front of nozzle KPa 2.5
air heat exchange loss KPa 2.5-3.0
gas heat exchange loss KPa 2.5-3.0
fume side loss Pa 20-30
diameter of chimney n   Φ600 Φ650 Φ500 Φ800 Φ980 Φ1000 Φ1200
 height of chimney mm 20 20 20 20 20 24 25 25
cold blast inlet pipe mm Φ273 Φ325 Φ377 Φ377 Φ377 Φ478 Φ580 Φ680
hot blast outlet pipe mm Φ325 Φ377 Φ400 Φ426 Φ530 Φ630 Φ630 Φ720
cold gas inlet pipe mm Φ273 Φ325 Φ377 Φ377 Φ426 Φ529 Φ630 Φ720
diameter of heat exchanger n 1600 1700 1800 3800 1900/1950 2100 2250 2400
height of chimney foot mm 800 800 800 900 1000 1100 1100 1100
length of heat exchanger mm 4000 4200 5000 5800 6500 8500 9500  
type of double preheater -- SRW-18
SRL-18
SRW-24
SRL-24
SRW-36
SRL-36
SRW-52
SRL-52
SRW-60
SRL-60
2SW/L-90 2SW/L-130 2SW/L-180
 

 

 

 

 
   
Tel:(086)0315-3163411/7045277 13931572100   Fax:(086)0315-7045277  E-mail:china@jinsharsq.com

Tangshan Jinsha Trade and Industry Ltd. all rights reserved      Website Production and Maintenance: (086)13483750352